YCCC Contest Tips

Recently, the YCCC email reflector has been rife with useful contest tips, mostly spurred by W1UE’s “tip of the day” -posts. Luckily, Fred K1VR has compiled a collection and they are now available on the YCCC homepage for your use (even if you aren’t yet a member).

Click here to see the collection (.pdf).



New layout

You might notice the site layout has been updated. The old theme, while attractive, made navigation difficult. A reader also mentioned the WordPress ads interfered with scrolling (but you’ll have to ask WordPress — I don’t solicit advertisement here).

If you notice anything out of place or stupid-looking, please excuse the appearance while I get everything settled. Thanks!



The trough of this solar cycle continues to produce interesting (albeit frustrating) effects. You may remember our struggles during the SPDX contest. This past weekend, amidst the WAE contest, we were treated to an X-class flare and an ensuing three-hour total HF blackout. And I do mean total.

Nick, K1NZ and I headed up to our familiar haunt, the superstation QTH of Dave, K1TTT. For those of you new to this blog (or new to ham radio), Dave is a legend in these parts for building a top-notch contest station but letting others use it. Unfortunately for us, it didn’t matter how big the station was; the conditions were truly awful.

“Oh yeah, I’ve seen conditions this bad before, just never during a contest weekend.” – Dave, K1TTT

Nick and I managed some uneventful runs on Friday night. The money band was 20 right from the get-go, but 40 did manage a gentle opening the first night. We were working only DL’s, something analogous to WAE, but almost all of them had very low serial numbers. So we knew the conditions were global after all.


K1LOL’s screencap of a headphone-less K1NZ summarized the contest. Note the beer.

Dave was experimenting with the new waterfall display in N1MM. Using a separate SDR, we were able to see the band and find holes to run more quickly. Well, we could have probably run anywhere in this one, but I imagine that’s what it would be useful for on a busy weekend. Cool nonetheless!

Jeff, NT1K came up Saturday and stayed into Sunday morning. The overnight was awful; at times we went 30 minutes or more without a single QSO. I sat down and fought KC4AAA’s pileup just to stay awake. At some point, we all went to bed — it was like the antennas were unplugged.

Jeff grabbed the early morning 20 run and had probably the best few hours of the entire contest. I relieved him and was treated to a decent five hours of strong Europeans. When I finally needed relief, Nick sat down and continued. But it wouldn’t last much longer…


Guess what happened on Sunday!

A massive X-class solar flare struck just as things were finally rolling. Nick stopped operating — there was no use. Total HF blackout! The flare was so tremendous that the ensuing proton storm hasn’t yet died down (and it’s Tuesday as I write this). Conditions remained in M-class until the end of the contest, although we did manage another few paltry runs of Europeans.

Sometimes contests are feast-or-famine. This time, it was just famine-or-famine. Join me in a quick prayer for the next sunspot peak.


Call: WA1J
Operator(s): K1NZ N1TA NT1K
Station: K1TTT

Class: M/S HP
Operating Time (hrs): 26
Location: USA

Summary:   Compare Scores
Band QSOs QTCs Mults
80: 9 6 36
40: 130 121 90
20: 813 809 94
15: 3 0 6
Total: 955 920 226 Total Score 422,846

Club: Yankee Clipper Contest Club



“Ham radio is dead”

This is in response to a Facebook post I saw. I responded there, but I’m going to break it out a bit deeper here. Sorry to those experiencing deja vu.

I was first licensed at 11 years old. I liked contesting, DX’ing, being on HF, operating CW/SSB, etc.. I did not like VHF. I did not like the tech stuff. I had very little technical interest, but I sure did like working multipliers. Being young made me the minority. Being of any age but interested in old-fashioned operating made me part of an even slimmer minority.

There was no BitX or Arduino or $50 QRP kits then. Had there been, I would have migrated into those. I didn’t have much money in middle school, so I was interested in doing whatever I could afford. Luckily, my parents bought me a TS-440 and a G5RV one Christmas and I was off to the races.

Then came high school, college, a career, etc. (in this case “etc.” means “girls”). I took down a lot of gear and was dormant for a while. I didn’t seriously return to the hobby until I was hired to work at ARRL HQ. Then I put up a tower, beams, bought an FT-1000, amps, and started chasing DX again. If I hadn’t been hired there, it would have taken me longer to return. This is because…

Ham radio is for middle-aged individuals with disposable income, a home, and an understanding spouse.

We spend so much energy trying to recruit young people, but that clearly isn’t a great return-on-investment when it comes to our numbers. Sure, kids are the future — but they have about two decades before they can carve out a realistic place for ham radio in their lives. There are certainly exceptions in our ranks, but we’re talking marketing “dollar per gallon” here.

If we did a survey, I suspect most of here have taken a hiatus from the hobby. I further suspect that hiatus came while we were getting jobs, starting families, and buying homes. So where would you sink the advertising money: on your 10 year-old self or on your 40 year-old self? My money is on the latter.

I’m thankful to have been in this hobby from a young age. At 28, I’ve been licensed the majority of my life. Heck, I can join QCWA before I’m even 40. So don’t read this as “ham radio is not for kids.” I’m just suggesting we avoid exclusively marketing to that crowd, and focus our efforts where the mileage is better.


DX cluster etiquette

For better or for worse, the DX cluster has been and will continue to be a part of this hobby. You can love it, you can hate it, you can write tirades about its merits or its evils — but it will still be there, quietly churning out spots to thousands.


Let the chaos begin

In this blog post, I won’t tell you if I love or hate the cluster. Frankly, I think my feelings are immaterial because they won’t change anything; the cluster isn’t going anywhere. I treat it as a tool, just like the processor on my radios or the grayline map on the wall.

Alternatively, I’ll propose a list of etiquette tips. Some of you may be running afoul of a few of these, but I’ve found it’s often because we forget there are operating techniques out there different from our own.

  1. Stop with the “can’t hear him” -spots. You may log into the cluster by telnet (or RF) and read each spot. In your case, you might receive a benefit from such a spot. However, you represent less than 5% of the cluster users. The rest of us see spots in a bandmap for our logging program or other application that strips away the “can’t hear him” -comment. In our case (which is the clear majority) your spot is a false spot. The easy solution for this is: ONLY SPOT WHAT YOU CAN HEAR. That’s the whole point of the system, no exceptions.


    How most of us see spots and why “can’t hear him” -spots are useless

  2. No brag spots. Spot what you hear, not what you just worked. Don’t bother spotting with a “TNX 4 QSO” -comment. The DX isn’t watching the cluster. You know he isn’t. We know he isn’t. We know that you know he isn’t. So you’re just blatantly sending a brag and wasting all of our bandwidth in the process. The truth is that nobody — and I mean literally nobody — cares who you just worked.
  3. Please DO spot (especially on phone). The proliferation of CW skimmer has caused a decline in “human-originated” spots, even on other modes. Be sure to post spots if the DX is useful. Don’t post spots if they violate #1 or #2 above.
  4. Maybe self spot. This one might surprise a few of you. With the birth of skimmer, self spotting has become a non-issue. A few guys might get their feathers ruffled if you do it, but they’ll be unable to articulate a reason beyond involving their own emotions. Remember that most contests forbid this behavior, so certainly avoid that, but if you’re running on 10m phone at dusk on a Tuesday night when the band is empty, I’d appreciate the spot so I can work you. Don’t do it all the time, don’t do it during contests, and only do it when it’s helpful; ask yourself “is this a weird opening everyone is missing?”
  5. Avoid mobbing one node. Certain large, reliable nodes seem to absorb most of the telnet traffic for planet earth. K1TTT is certainly one of them, AB5K might be another. But there are thousands of DX cluster nodes available. Try another one! Spread out the traffic and decrease stress on the system. The sysops will thank you.
  6. Don’t bother with an announcement. To think that you have anything interesting enough to post to 100,000+ people is pure arrogance. In two decades, I have never once found a reason to use the announcement feature. When I was running a node, I actually blocked all announcements from coming in. They’re silly, rarely helpful, and sometimes just offensive. Also, please don’t make false spots to serve as announcements (see “T0ALL” in the image above). You’re messing with our bandmaps and you look like a fool. Nothing (and nobody) is important enough for that.


If you have any tips or tricks to add, be sure to fire away in the comments below!



Remote Operation: an editorial

There’s a debate raging on the CQ-Contest list at the moment centered on remote operation. Both as a contest administrator and a participant, I’ve been familiar with the practice and even tried it once or twice. My station is, at the moment, capable of it (albeit with some amplifier limitations).

There are two sides to the argument:

  • “It’s internet.” The control of the station relies on the internet; that is to say, without internet, the QSO wouldn’t occur (even though it is strictly RF between the physical radios).
  • “It’s the same as a long mic cord.” The internet is not replacing any of the RF; it simply replaces the mic (or key) cord and other control devices.

I was pretty neutral about the whole thing until I read EI5DI’s piece, which is probably the ugliest, most petty opinion piece on the subject today. Now I’m convinced there is an entire class of operators who have chosen their decade and refuse to leave it. Let me save you the agony of reading that and paraphrase: remote operation is bad because it involves the internet in some way.

FACT: the internet replaces the control, NOT the RF. So EI5DI (and his ilk, whoever and wherever they may be) are really asking for a rule that says I must be mechanically connected to the controls of my station at all times. So for those of you who use wireless switchboxes or filter networks (like me): you’re out. Sorry.

Personally, I don’t care how long your mic cord (or any other control interface) is. I don’t care if you’re in the next room or the next continent. Like EI5DI says: facts are facts, so here’s a fact: remote operators are sending an exchange based on the physical location of the transmitter — the location of the operator is therefore immaterial. I’m not even sure how EI5DI can reach the conclusion that the location of the operator’s butt has anything to do with a radio contest.

Is it because we’ve made it too easy to win? Is it because this allows some of us to build far remote stations with great capabilities in advantageous locations? Sure. But that doesn’t stop EI5DI from doing that too. There’s realtors around the globe happy to help you find that dream location deep in a jungle and there’s airlines willing to fly you back and forth to operate it. To say that the difficulties of doing it for each major contest somehow discredits those operating remote stations is just blatant jealousy, especially when you consider the prevalence of rare zones in recent contests brought to us by remote stations.

This just becomes more embarrassing the longer I think about it. If anything, remote stations that rely on an internet or other data link for control actually have a disadvantage, as that link could go down at any time.

The hobby is always changing. If you want to sit in a room full of radios and use low dipoles in CQWW, that’s great — it’s about having fun. If you want to use cutting-edge technology and hand out a rare zone, that’s great too. But either way, for the love of Hiram, can we just let others do what they want and stop pretending they are lesser operators because they’re doing something we can’t?